APLEX4
For EX4
APLEX4/400
Linear P&A. With 400mm Piston, useful 240mm. Max. 30 Applications / min
For Upper / Lateral / Lower Labeling, in Stop / Motion, with Contact / Blow
Self-dimensioning with contact, for different heights of product on it between. Real-time tagging
Linear P&A. With 400mm Piston, useful 240mm. Max. 30 Applications / min
For Upper / Lateral / Lower Labeling, in Stop / Motion, with Contact / Blow
Self-dimensioning with contact, for different heights of product on it between. Real-time tagging
VIDEO: -->Additional videos at the end
ACCESSORIES:
APLEX4-LP
100x150 bowl
Configurable for Min. 25x25mm, max .: 100x100mm. For Contact / Blowing. Flat base
APLEX4-LR
Empty cup detection sensor
To detect, if the label has been dropped or is not correctly in the bowl
To prevent a product from leaving if it is labeled. Selectable, by menu
APLEX4-PS
Self-dimensioning sensor without contact
To label at different heights; NO contact, by blowing. Adjustable labeling distance
APLEX4-LP
100x150 bowl
Configurable for Min. 25x25mm, max .: 100x100mm. For Contact / Blowing. Flat base
APLEX4-LR
Empty cup detection sensor
To detect, if the label has been dropped or is not correctly in the bowl
To prevent a product from leaving if it is labeled. Selectable, by menu
APLEX4-PS
Self-dimensioning sensor without contact
To label at different heights; NO contact, by blowing. Adjustable labeling distance
APLEX4-TD
Photocell Print+Apply; Apply
With Connector DIN4-APLEX4, cable + photocell connector; without support (as a replacement)
with mirror, for a more accurate product signal and 'black' product. With support
APLEX4-LI
Illuminated status indicator (Ready, Working, Error)
With the option of 'Pre-Warning' (End of Roll), the light 'Working' is configured to indicate 'End of Roll'
next; depending on the labels per roll and those applied
APLEX4-HD
Detection sensor, operator safety
APLEX4-IO
Interface In / Out
2 x Output Signals + 1 x Input Signal. Output signals, configurable
Example: Generic Error (Piston, Printer, Empty Cup Sensor) + Shooting Bar Code Reader
1 signal, can be used as Yes / No inhibition of a 2nd cascade APLEX4; to work in 'Non-Stop' mode
with two applicators in line, to work without stoppages with rolls of ØExt labels. 200mm instead of
Ø300mm, heavier and difficult to handle.
Signal In: Remove Error and / or Cycle Trip (Example: Print & Apply Label Equivalent to 'Test Button')
Photocell Print+Apply; Apply
With Connector DIN4-APLEX4, cable + photocell connector; without support (as a replacement)
with mirror, for a more accurate product signal and 'black' product. With support
APLEX4-LI
Illuminated status indicator (Ready, Working, Error)
With the option of 'Pre-Warning' (End of Roll), the light 'Working' is configured to indicate 'End of Roll'
next; depending on the labels per roll and those applied
APLEX4-HD
Detection sensor, operator safety
APLEX4-IO
Interface In / Out
2 x Output Signals + 1 x Input Signal. Output signals, configurable
Example: Generic Error (Piston, Printer, Empty Cup Sensor) + Shooting Bar Code Reader
1 signal, can be used as Yes / No inhibition of a 2nd cascade APLEX4; to work in 'Non-Stop' mode
with two applicators in line, to work without stoppages with rolls of ØExt labels. 200mm instead of
Ø300mm, heavier and difficult to handle.
Signal In: Remove Error and / or Cycle Trip (Example: Print & Apply Label Equivalent to 'Test Button')
APLEX4-SC
Column, support Team
Base with wheels and feet (x4). With Fit: Vertical 1300mm - Horizontal 450mm
Base, with side holes; ready to put crossbars. For example: To mount Tape
Conveyor
APLEX4-HR
Regulation 500mm, for mounting on APLEX4-SC
Regulation with steering wheel of 500mm Horizontal
APLEX4SC is needed
APLEX4-VR
Column, support Team
Base with wheels and feet (x4). With Fit: Vertical 1300mm - Horizontal 450mm
Base, with side holes; ready to put crossbars. For example: To mount Tape
Conveyor
APLEX4-HR
Regulation 500mm, for mounting on APLEX4-SC
Regulation with steering wheel of 500mm Horizontal
APLEX4SC is needed
APLEX4-VR
Regulation 500mm, for mounting on APLEX4-SC
Regulation with steering wheel of 500mm Horizontal
APLEX4SC + APLEX4-HR is needed
Regulation 600mm, for mounting on APLEX4-SC
Regulation of 600mm Horizontal/Vertical
APLEX4SC is needed
P&A Without contact, with double and independent signal of: (1ª) Print and (2ª) Apply (https://youtu.be/P41O_MXnpmI)