Labeling solutions: Print & Apply
Print & Apply equipment 'Plug & Play' fast to install, factory configured, easy to start up and simple maintenance. With different configurations
-SAMPLE VIDEO: P&A Demo (https://youtu.be/7kA-1Z9yvOk)
* If the direct access to any video does not work please right click on the access and
press 'open link ...' to visualize it. Additionally there is the possibility of 'copy and paste' the
URL framed in parentheses
APLEX4
For EX4
APLEX4/400
Linear P&A. With 400mm Piston, useful 240mm. Max. 30 Applications / min
For Upper / Lateral / Lower Labeling, in Stop / Motion, with Contact / Blow
Self-dimensioning with contact, for different heights of product on it between. Real-time tagging
Linear P&A. With 400mm Piston, useful 240mm. Max. 30 Applications / min
For Upper / Lateral / Lower Labeling, in Stop / Motion, with Contact / Blow
Self-dimensioning with contact, for different heights of product on it between. Real-time tagging
VIDEO: -->Additional videos at the end
ACCESSORIES:
APLEX4-LP
100x150 bowl
Configurable for Min. 25x25mm, max .: 100x100mm. For Contact / Blowing. Flat base
APLEX4-LR
Empty cup detection sensor
To detect, if the label has been dropped or is not correctly in the bowl
To prevent a product from leaving if it is labeled. Selectable, by menu
APLEX4-PS
Self-dimensioning sensor without contact
To label at different heights; NO contact, by blowing. Adjustable labeling distance
APLEX4-LP
100x150 bowl
Configurable for Min. 25x25mm, max .: 100x100mm. For Contact / Blowing. Flat base
APLEX4-LR
Empty cup detection sensor
To detect, if the label has been dropped or is not correctly in the bowl
To prevent a product from leaving if it is labeled. Selectable, by menu
APLEX4-PS
Self-dimensioning sensor without contact
To label at different heights; NO contact, by blowing. Adjustable labeling distance
APLEX4-TD
Photocell Print+Apply; Apply
With Connector DIN4-APLEX4, cable + photocell connector; without support (as a replacement)
with mirror, for a more accurate product signal and 'black' product. With support
APLEX4-LI
Illuminated status indicator (Ready, Working, Error)
With the option of 'Pre-Warning' (End of Roll), the light 'Working' is configured to indicate 'End of Roll'
next; depending on the labels per roll and those applied
APLEX4-HD
Detection sensor, operator safety
APLEX4-IO
Interface In / Out
2 x Output Signals + 1 x Input Signal. Output signals, configurable
Example: Generic Error (Piston, Printer, Empty Cup Sensor) + Shooting Bar Code Reader
1 signal, can be used as Yes / No inhibition of a 2nd cascade APLEX4; to work in 'Non-Stop' mode
with two applicators in line, to work without stoppages with rolls of ØExt labels. 200mm instead of
Ø300mm, heavier and difficult to handle.
Signal In: Remove Error and / or Cycle Trip (Example: Print & Apply Label Equivalent to 'Test Button')
Photocell Print+Apply; Apply
With Connector DIN4-APLEX4, cable + photocell connector; without support (as a replacement)
with mirror, for a more accurate product signal and 'black' product. With support
APLEX4-LI
Illuminated status indicator (Ready, Working, Error)
With the option of 'Pre-Warning' (End of Roll), the light 'Working' is configured to indicate 'End of Roll'
next; depending on the labels per roll and those applied
APLEX4-HD
Detection sensor, operator safety
APLEX4-IO
Interface In / Out
2 x Output Signals + 1 x Input Signal. Output signals, configurable
Example: Generic Error (Piston, Printer, Empty Cup Sensor) + Shooting Bar Code Reader
1 signal, can be used as Yes / No inhibition of a 2nd cascade APLEX4; to work in 'Non-Stop' mode
with two applicators in line, to work without stoppages with rolls of ØExt labels. 200mm instead of
Ø300mm, heavier and difficult to handle.
Signal In: Remove Error and / or Cycle Trip (Example: Print & Apply Label Equivalent to 'Test Button')
APLEX4-SC
Column, support Team
Base with wheels and feet (x4). With Fit: Vertical 1300mm - Horizontal 450mm
Base, with side holes; ready to put crossbars. For example: To mount Tape
Conveyor
APLEX4-HR
Regulation 500mm, for mounting on APLEX4-SC
Regulation with steering wheel of 500mm Horizontal
APLEX4SC is needed
APLEX4-VR
Column, support Team
Base with wheels and feet (x4). With Fit: Vertical 1300mm - Horizontal 450mm
Base, with side holes; ready to put crossbars. For example: To mount Tape
Conveyor
APLEX4-HR
Regulation 500mm, for mounting on APLEX4-SC
Regulation with steering wheel of 500mm Horizontal
APLEX4SC is needed
APLEX4-VR
Regulation 500mm, for mounting on APLEX4-SC
Regulation with steering wheel of 500mm Horizontal
APLEX4SC + APLEX4-HR is needed
Regulation 600mm, for mounting on APLEX4-SC
Regulation of 600mm Horizontal/Vertical
APLEX4SC is needed
P&A Without contact, with double and independent signal of: (1ª) Print and (2ª) Apply (https://youtu.be/P41O_MXnpmI)
- Details
- Category: Labeling solutions: Print & Apply